Miele Ventilation System Operating And Installation Instructions - Page 15
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele Ventilation System. Miele Ventilation System 32 pages. Ventilation system
Print Page
^ Confirm the setting by pressing the
charcoal filter sensor button |.
All the sensors go out.
If the procedure is not confirmed
within 4 minutes of programming the
hood will automatically default to the
previous setting.
Checking the charcoal filter timer
To check the percentage of time
already used:
^ Press the On/Off sensor button s to
turn the fan on.
^ Press and hold down the charcoal fil-
ter button |.
One or more of the sensors 1 to 4 will
flash.
The number of flashing sensors
indicates the percentage of operating
time already been used.
Sensor 1
Sensors 1 and 2 = 50 %
Sensors 1 to 3
Sensors 1 to 4
The number of operating hours used
remains stored when the ventilation
system is turned off or if there is a
power failure.
= 25 %
= 75 %
= 100 %
Sensor button tone
Whenever you press a sensor button,
you will hear a brief tone for
confirmation.
You can deactivate this audible tone.
^ Press the On/Off sensor button s to
turn the fan off.
^ Press the 4 sensor button and the
grease filter sensor button |
simultaneously for 5 seconds, until
you hear a tone. The audible tone is
now deactivated for all functions.
^ To reactivate the tone, repeat the
process.
If the ventilation system has been
disconnected from the power supply or
after a power failure, the audible tone is
automatically reactivated, regardless of
the previous setting.
Automatic safety shut-off
If the fan is left running and no button is
pressed for 10 hours, the fan will turn
off automatically.
The overhead lighting remains on.
^ Press the On/Off sensor button s to
turn the fan back on again.
Operation
15