Miele CS 1223 Operating And Installation Instructions - Page 13
Browse online or download pdf Operating And Installation Instructions for Cooktop Miele CS 1223. Miele CS 1223 40 pages. Induction wok
Also for Miele CS 1223: Operating And Installation Instruction (48 pages), Operating And Installation Instructions (44 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (44 pages)
Print Page
Settings
Use for
Keeping food warm,
Melting chocolate, etc.
Warming food
Stir-frying
Auto-heat
Continued
power level
1
2
3
4
5
6
7
8
9
Power
level
1 - 2
3 - 6
7- 9
Heat-up time
(approx.)
min : sec
0 : 15
0 : 15
0 : 25
0 : 50
2 : 00
5 : 50
2 : 50
2 : 50
-
When Auto-heat has been activated,
the burner switches on automatically at
the highest setting and then switches to
the continued power level which was
selected. The "heat-up" time depends
on which continued power level has
been chosen (see table).
Taking the wok off the burner while
Auto-heat is in operation interrupts the
function. It will resume if the wok is
placed back on the burner within
3 minutes.
To activate Auto-heat
^ Turn the control knob
counterclockwise as far as it will go
and hold until an A appears.
^ Turn the control knob clockwise to
the desired continued power level.
Once Auto-heat has been activated the
continued power level must be set
within 10 seconds. After this time the
level cannot be changed.
Changing the continued power level
after 10 seconds will deactivate the
Auto-heat function.
During the Auto-heat phase an A will
show in the display.
Use
13