Miele CS1221I Operating And Installation Instructions - Page 5

Browse online or download pdf Operating And Installation Instructions for Cooktop Miele CS1221I. Miele CS1221I 48 pages. Ceramic combiset with induction
Also for Miele CS1221I: Installation Instructions Manual (21 pages)

Miele CS1221I Operating And Installation Instructions
Technical Safety
~
Installation, repair and maintenance
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
~
Before installing the combiset,
check for externally visible damage.
Do not operate a damaged appliance.
~
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician. The manufacturer
will not be held responsible for
damages caused by the lack, or
inadequacy, of an effective grounding
system.
~
Before installation, make sure that
the voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
appliance damage. Consult a qualified
electrician if in doubt.
~
Do not use an extension cord to
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance.
~
Do not use the appliance until it has
been properly installed in the
countertop.
IMPORTANT SAFETY INSTRUCTIONS
~
power cord does not come into contact
with any portion of the cooktop which
may become hot during use.
~
appliance from the main power supply.
~
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele's Technical Ser-
vice Department.
~
outer casing of the appliance.
~
outdoors.
~
warranty repairs should only be
performed by an authorized service
technician. Otherwise the warranty is
void.
~
appliance, it must be turned off immedi-
ately and disconnected from the main
power supply. Contact Miele's
Technical Service Department.
Do not use the appliance until it has
been repaired. Ensure power is not
supplied to the appliance until repair
work is completed.
~
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
Install the appliance so that the
Before servicing, disconnect the
Do not operate any appliance with a
Under no circumstances open the
The combiset must not be installed
While the appliance is under
In the event of any damage to the
Defective components should be
5