ALLNIC AUDIO L-7000 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Amplifier ALLNIC AUDIO L-7000. ALLNIC AUDIO L-7000 15 pages. Line-stage preamplifier
Also for ALLNIC AUDIO L-7000: Owner's Manual (10 pages)

Print Page
ALLNIC AUDIO L-7000 Owner's Manual

SAFETY

•
CAREFULLY and SLOWLY remove ALL cardboard and Styrofoam cushioning material inside
the tube chimneys before operation..
•
Disconnect the power cord by pulling the plug, not the cable.
•
Keep the power cord away from any heat source.
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm environment, allow sufficient time for any
condensation to evaporate before plugging the unit into an AC connection.
•
Do not attempt any repairs.
•
Do not remove the chassis cover without specific authorization from your Allnic dealer.
•
See the notes on "Location, Location, Location".

CLEANING

A.
Chassis and glass
Use only a soft, lint-free cloth dampened slightly with water only (NO cleaning fluids!) to clean
the faceplate, meter glass and chassis.
B.

Connectors

You may use any good quality contact cleaner recommended for such applications to clean the
contacts from time to time as you deem appropriate.

INITIAL SET-UP

A.

LOCATION, LOCATION, LOCATION

Like all audio products using tubes, the Allnic Audio L-7000 needs to be placed on a solid stand
in a location that provides for good air circulation around the preamplifier.
•
DO NOT cover the top of the preamplifier.
•
DO NOT place the unit on carpet or foam.
•
DO NOT subject the unit to knocks and shocks as you move it around. This advice is
meant particularly for those who may want to place the L-7000 on a set of after-market
isolation feet or similar devices. Dropping one side of the L-7000, or the whole unit, is
not a good thing.
•
DO NOT place the unit near a strong light or heat source.
•
DO NOT place anything heavy on the unit.
•
DO NOT allow rubber or vinyl materials to rest on the unit's chassis for long periods of
time. This could discolour the metal.
•
DO place the unit on a shelf or stand that is stable and not subject to vibration or
sudden shock.
•
DO consider using a high quality power cord and inter-connects, both inputs and
outputs. The L-7000 is a highly sensitive piece of electronic equipment designed for
neutrality and will output what you put into it. Allnic's Zero Loss Technology cables will
work synergistically with the L-7000.
7