ALLOYLED AL-60-03-0004-V2 Operation - Page 2
Browse online or download pdf Operation for Receiver ALLOYLED AL-60-03-0004-V2. ALLOYLED AL-60-03-0004-V2 3 pages. Receiver for wireless remote controllers
Print Page
Wiring Diagram (Single Zone with Multiple Slaves)
AC Power
50/60Hz
Master
Slave
Hard wiring: ensures synchronization
of light colors in cycle modes
Slave
Operation
With single color lighting
How to Pair the Receiver with the Wireless Remote Control (AL-60-03-0002), Remote Control Dimmer Switch (AL-60-03-0001), or
DMX Touch Wall Controller (AL-60-03-0003)
1. Connect the components according to the diagram above, and power on when connections have been verified.
2. Wake up the controller by touching the ON/OFF button. The power indicator will light up.
AC Power
3. Short press the "Learning Key" button on the receiver.
50/60Hz
4. Touch a zone button on the controller. If only setting up one zone, simply press the "1" button.
5. Then touch the color wheel.
6. The connected LED lights will blink to confirm the zone designation.
How to Unpair the Receiver and Controller
1. Hold down the "Learning Key" button on the receiver for about 5 seconds. When the LED lights flash, the controller has been unpaired.
Multiple Zones and Multiple Controllers.
1. To Set Up Multiple Zones: repeat the steps above in "How to Pair", assigning each zone its own number on the controller you are using.
With dual color lighting
An unlimited number of receivers can be set to a single zone. The total number of zones is limited only by the remote controller being
used with this receiver.
2. To Set Up Multiple Remotes to Control the Same Wireless Receiver: Each receiver can be controlled by a maximum of 8 different
remote controllers. To set up, repeat the steps above in "How to Pair" for each remote.
AC Power
50/60Hz
www.AlloyLED.com
page 2 of 3
®
®
L
N
G
Master
Slave
®
Learning Key
Wireless Receiver
AL-60-03-0004-V2
Master
Slave
®
Learning Key
Wireless Receiver
AL-60-03-0004-V2
Master
Slave
®
Learning Key
Wireless Receiver
AL-60-03-0004-V2
L
N
G
Receiver Repeater
Learning Key
RF Receiver
L
N
G
|
Call: 800.910.LEDS [5337]
24V Non-Dimmable
V-
Constant Voltage
V+
Driver
V+
R-
1/R/
ww
2/G/
cw
3/B/
ww
G-
4/W/
cw
B-
W-
V+
R-
1/R/
ww
2/G/
cw
3/B/
ww
G-
4/W/
cw
B-
W-
V+
R-
1/R/
ww
2/G/
cw
3/B/
ww
G-
4/W/
cw
B-
W-
V-
12V/24V/36V
CV PSU
V+
V+
1-
1/R/
ww
2/G/
cw
3/B/
ww
4/W/
cw
2-
3-
4-
V-
12V/24V/36V
CV PSU
V+
| Text: 510.400.6690
V+
R-
G-
B-
W-
V+
R-
G-
B-
W-
V+
R-
G-
B-
W-
V+
If C o n n e c t w ith S in g le C o lo r L E D S tr ip
V-
V-
V-
V-
|
v1.1