Miller XR-Aluma-Pro 35W Owner's Manual - Page 15

Browse online or download pdf Owner's Manual for Welding System Miller XR-Aluma-Pro 35W. Miller XR-Aluma-Pro 35W 36 pages. Air and water-cooled guns

Print Page

5-5. Threading Welding Wire Through Gun

For XR-Aluma-Pro Plus Gun:

Welding wire is electrically live when

gun trigger is used to jog wire.

Turn OFF coolant supply before threading wire

through gun..

Tools Needed:

Cut off wire. Close and

latch wire feeder door.

Refer to wire feeder manual for instructions on

feeding wire through feeder.

JOG / PURGE

Lay gun cable out straight. Press Jog switch until about 6

in. (152 mm) of wire is sticking out end of contact tip.

Verify pressure adjustment

on handle matches the wire

type. See Section 6-2.

Ref. 285542-A / 285543-A

OM-285555 Page 11