Miller Travel Master SB-10D Owner's Manual - Page 5
Browse online or download pdf Owner's Manual for Welding Accessories Miller Travel Master SB-10D. Miller Travel Master SB-10D 44 pages. Automatic welding sidebeam
Print PageSECTION 1 – SAFETY PRECAUTIONS AND SIGNAL WORDS
1-1.
GENERAL INFORMATION AND SAFETY
A. General
Information presented in this manual and on various la-
bels, tags, and plates on the unit pertains to equipment
design, installation, operation, maintenance, and
troubleshooting which should be read, understood, and
followed for the safe and effective use of this equipment.
The nameplate of this unit uses international symbols
for labeling the front panel controls. The symbols also
appear at the appropriate section in the text.
B. Safety
The installation, operation, maintenance, and trouble-
shooting of arc welding equipment requires practices
and procedures which ensure personal safety and the
safety of others. Therefore, this equipment is to be in-
stalled, operated, and maintained only by qualified per-
sons in accordance with this manual and all safety pre-
cautions listed in the Arc Welding Safety Precautions in
the welding power source Owner's Manual.
Electrical
Requirements For
Carriage Control
115 Volts,
2 Amps AC
50/60 Hz
Travel Range:
CAUTION: INCORRECT CARRIAGE LOAD-
ING can cause personal injury and equip-
ment damage.
Net effective load must be in a downward
direction.
Total load weight must fall within safe
operating zone curve on Chart 2-1.
The carriage will not resist upward loads.
SECTION 2 – SPECIFICATIONS
Table 2-1. Specifications
Beam Length
Load Rating
Total Length:
250 lbs. (113 kg)
10 ft. (3 m)
at 2 ft. (0.6 m)
Carriage
From Face
of Carriage
8 ft. (2.4 m)
Chart 2-1. Load Curve
1-2.
SAFETY ALERT SYMBOL AND SIGNAL
WORDS
The following safety alert symbol and signal words are
used throughout this manual to call attention to and
identify different levels of hazard and special instruc-
tions.
This safety alert symbol is used with the signal
words WARNING and CAUTION to call atten-
tion to the safety statements.
WARNING statements identify procedures or
practices which must be followed to avoid seri-
ous personal injury or loss of life.
CAUTION statements identify procedures or
practices which must be followed to avoid minor
personal injury or damage to this equipment.
IMPORTANT statements identify special instructions
necessary for the most efficient operation of this equip-
ment.
Carriage Travel
Speed
Accuracy
5 to 125 ipm
(0.1 to 3.2 mpm)
Carriage
Shipping
Tracking
Weight
1240 lbs.
.015 in.
(563 kg)
(0.4 mm)
SA-121 962
OM-889 Page 1