Miller XR Python Owner's Manual - Page 16
Browse online or download pdf Owner's Manual for Welding Accessories Miller XR Python. Miller XR Python 31 pages. 200 ampere push-pull welding gun
Print Page
Replacement Kits
Handle Kit......................................................................................... 005-0699
Left and right handles, screws and drive roll door, as a replacement for all
Python
guns.
®
Trigger Kit......................................................................................... 005-0694
Trigger adjustment kit includes a spring and sensitivity adjustment screw
replacement for all Python
Micro Switch Kit............................................................................... 005-0701
Replacement micro switch assembly for all Python
Potentiometer Kit............................................................................. 005-0695
Replacement potentiometer assembly for all Python
Conduit
Flat spiral steel conduit for steel & cored wire ................................... 615-0216
Snake Skins
A Snake Skin protective cover is standard on the XR™ Python
order spare replacement covers to protect the lead assy of the gun when the
original becomes damaged or worn. It can easily be replaced in the field by
means of a hook and loop type fastener.
Replacement Snake Skin .................................................................. 931-0122
Contact Tips
The XR™ Python
comes standard with genuine Miller FasTip Contact Tips.
®
For a complete listing of available contact tips for the XR™ Python
reference the XR™ Python
manual.
Diffuser
The XR™ Python
comes standard with a genuine Miller Gas Diffuser. For a
®
complete listing of available diffusers for the XR™ Python
the XR™ Python
Barrel breakdown and Parts List later in this manual.
®
Nozzle
The XR™ Python
comes standard with a genuine Miller Gas Nozzle. For a
®
complete listing of available nozzles for the XR™ Python
the XR™ Python
Barrel breakdown and Parts List later in this manual.
®
Barrel
The XR™ Python
comes standard with a 60˚ curved barrel. The barrel
®
assembly locks to the Python
Barrel Removal and Installation
To remove the barrel assembly, loosen the patented EZ Lock™ taper lock nut
until it is clear of the threads. Pull barrel out of the gun body.
To replace a barrel assembly, push the barrel assembly into the gun body
until it stops. To assure proper seating of the barrel, open the drive/idler roll
door in the top of the handle. The rear face of the barrel should now be flush
with the gun body. Take care not to damage the o-rings when inserting into
the body. Tighten taper lock nut assembly firmly so that barrel cannot rotate
while welding.
Barrel Rotation
To rotate a barrel assembly, loosen the patented EZ Lock™ taper lock nut
assembly no more than 1 turn. Rotate barrel to the position of your choice
and re-tighten taper lock nut assembly firmly so that the barrel cannot rotate.
XR™ Python
Owner's Manual - Page 4
®
guns.
®
®
Barrel breakdown and Parts List later in this
®
body using the patented EZ Lock™ system.
®
guns.
guns.
®
. You may
®
, please
®
, please reference
®
, please reference
®