Miller ICE-100TM Owner's Manual

Browse online or download pdf Owner's Manual for Flashlight Miller ICE-100TM. Miller ICE-100TM 38 pages. Air-cooled torches for plasma arc cutting

Print Page

OWNER'S MANUAL

ICE-12C, ICE-25C, ICE-25CX, ICE-27C, ICE-27T

ICE-40C, ICE-50C, ICE-50CM, ICE-55C, ICE-55CM, ICE-80C, ICE-80CM,

ICE-80CX, ICE-80CXM, ICE-80T, ICE-80TM, ICE-100T, And ICE-100TM Torches

Specifications

Air-cooled torches for plasma arc cutting (PAC)

12 A model: 12 A at 35% duty cycle;

25 A model: 25 A at 35% duty cycle;

27 A model: 27 A at 35% duty cycle;

40 A model: 40 A at 50% duty cycle;

50 A models: 50 A at 60% duty cycle;

55 A model: 55 A at 60% duty cycle;

80 A model: 80 A at 50% duty cycle

100 A model: 100 A at 80% duty cycle

12 A model equipped with 20 ft (6.1 m) cable

25 A model equipped with 15 ft (4.6 m) cable; available with optional 25 ft (7.6 m) cable

27 A model equipped with 20 ft (6.1 m) cable;

40 A model equipped with 25 ft (7.6m) cable; available with optional 50 ft (15.2 m) cable

50 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable

55 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable

80 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable

100 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable

Use air or nitrogen plasma gas:

12 A model: 1 CFM (28.3 L/min) at 40 PSI (276 kPa);

25 A model: 4.5 CFM (129 L/min) at 60 PSI (414 kPa);

27 A model : 4.5 CFM (129 L/min) at 60 PSI (414 kPa);

40 A model: 6 CFM (170 L/min) at 75 PSI (517 kPa);

50 A model: 5.3 CFM (152 L/min) at 70 PSI (482 kPa);

55 A model: 6 CFM (172 L/min) at 70 PSI (482 kPa);

80 A (C, CM, CX, and CXM) model: 7.2 CFM (207 L/min) at 80 PSI (551 kPa)

80 A (T and TM) model: 7.8 CFM (221 L/min) at 70 PSI (482 kPa)

100 A model: 9.2 CFM (260 L/min) at 75 PSI (517 kPa)

Safety interlock devices shut down power source

12 A, 27 A, 40 A, 50 A, 55 A, 80 A and 100 A models have safety trigger guard

Gear rack pitch for 50 A, 55 A, 80 A and 100A machine-held models: 32

Cutting capacity for mild steel:

12 A model − up to 3/16 in (5 mm) at 12 A;

25 A model − up to 3/8 in (10 mm) at 25 A;

27 A model − up to 3/8 in (10 mm) at 27 A;

40 A model − up to 1/2 in (12.7 mm) at 40 A;

50 A model − up to 7/8 in (22 mm) at 50 A;

55 A model - up to 1 in (25.4 mm) at 55 A;

80 A model − up to 1-1/4 in (32 mm) at 80 A

100 A model − up to 1-1/2 in (38 mm) at 100 A

OM-1593

Use above FORM number when ordering extra manuals.

2007−08

176 877T

2007 MILLER Electric Mfg. Co.