Miller 8811 Manual - Page 16

Browse online or download pdf Manual for Safety Equipment Miller 8811. Miller 8811 24 pages. Beam anchors

Print Page

V. MAINTENANCE

A. SERVICING

Servicing must only be carried out by a qualified person trained in the inspection and replacement of

the device. A record log of all servicing and inspection dates for this system should be maintained by

the company safety officer. This product and all components must be withdrawn from service if

subjected to fall arresting forces. Only original Miller Equipment replacement parts are approved

for use in this device. Contact your Miller distributor or Dalloz Fall Protection's Customer Service

department at 1-800-873-5242 if you have any questions.

B. CLEANING/STORAGE

Basic care of all Miller safety equipment will prolong the durable life of the unit and will contribute

toward the performance of its vital safety function. Proper storage and maintenance after use are as

important as cleansing the equipment of dirt, corrosives, or contaminants. Storage areas should be

clean, dry and free of exposure to fumes or corrosive elements.

Wipe off all surface dirt with a sponge dampened in plain water. Squeeze the sponge dry. Dip the

sponge in a mild solution of water and commercial soap or detergent. Work up a thick lather, with a

vigorous back and forth motion. Then wipe dry with a clean cloth. Hang freely to dry, but away from

excessive heat, steam, or long periods of sunlight.

Essuyez toute la saleté en surface avec une éponge trempée dans l'eau du robinet. Essorez

l'éponge. Trempez ensuite dans une solution légère de savon ou de détergent commercial. Faites

mousser abondamment en frottant vigoureusement dans les deux sens. Essuyez ensuite avec un

chiffon propre. Pendez pour le séchage en évitant les chaleurs trop fortes, la vapeur et les

longues périodes d'exposition au soleil.

Frote toda la suciedad de la superficie con una esponja mojada en agua. Exprima la esponja hasta

secarla. Sumerja la esponja en una solución suave de agua y jabón o detergente comercial. Obtenga

una espuma espesa con un movimiento vigoroso de vaivén. A continuación frote hasta que esté seco

con un trapo limpio. Cuelgue para secar, pero alejado del calor excesivo, vapor o largos períodos de

luz del sol.