ABB E-Hub 2.0 Getting Started - Page 7

Browse online or download pdf Getting Started for Industrial Equipment ABB E-Hub 2.0. ABB E-Hub 2.0 18 pages.

Print Page

A R C H I T E C T U R E

Network configuration

Connect your laptop via ethernet cable to the same ethernet network where the E-Hub 2.0 ETH1 interface

and all Modbus TCP field devices are connected;

Internet cloud

Ethernet Switch

Emax

Tmax T

• E-Hub 2.0 must be provided with internet connection either via ETH0 (site network or dedicated

router with SIM card), Wi-Fi or cellular connectivity.

• For internet connectivity, you must ensure that the following destination ports are not forbidden by

the firewall, so that these ports could be accessible by E-Hub 2.0:

- 443/TCP: needed for the upload of the data via HTTPS

- 53/UDP: needed for public DNS

- suggested DNS server :

- 208.67.222.222 OpenDNS

- 8.8.8.8 Google

- 1.1.1.1 Cloudflare

- 123/UDP: if needed to use NTP server synchronization time

• Ekip Connect uses some local ports for data communication with the device:

- Port 502 TCP, Modbus TCP Communication

- Port 69 UDP, TFTP Communication

• Register on MyABB to activate an account.

• The user is not blocked by any firewall, device or software from reaching

prodabbauth.azurewebsites.net on port 443

• The user is generally able to connect to the internet and reach other internal (if connected to ABB Net-

work) or external internet websites.

• The user has cookies enabled in the browser.

Note: while devices provisioning process is running into ABB Ability, be sure your firewall is disabled.

ETH

COM 0

COM 1

RS-485 1/2

Ethernet Switch

TCP/IP

CMS-700 +

Open CTs on

MCBs

Laptop

Emax 2