Panasonic BM-ET300 Setup Manual - Page 10

Browse online or download pdf Setup Manual for Digital Camera Panasonic BM-ET300. Panasonic BM-ET300 16 pages. Iris camera

Print Page

Operation mode change: Switch 1 changes the iris

camera between the "normal operation" mode and

"setup" mode. Before setup, set this switch to OFF.

Booting program change: Switch 2 changes the boot-

ing program used by the iris camera. When the

program installed in the iris camera cannot boot the

iris camera, set this switch to ON and supply the

power again. The factory default program will boot

the iris camera. (Normally, set the switch to OFF.)

"Tamper detection" mode activation/cancellation:

Switch 3 cancels the "tamper detection" mode acti-

vated by the front/rear tamper detection switch.

When the "tamper detection" mode is cancelled, the

buzzer sound will stop and setup becomes avail-

able.

Note: Before closing the cover, set Switch 3 to OFF. If

the cover is attached while the switch is set to ON,

the iris camera cannot work properly.

y Tamper detection buzzer volume controller

This controller is used for adjusting the sound level of

buzzer, which is output while the "tamper detection"

mode is activated.

Note: Avoid adding excessive force to the controller.

That may cause damage.