Panasonic CF-H2 series Operating Instructions Manual - Page 32
Browse online or download pdf Operating Instructions Manual for Digital Camera Panasonic CF-H2 series. Panasonic CF-H2 series 40 pages. Personal computer
Also for Panasonic CF-H2 series: Operating Instructions Manual (36 pages), Operating Instruction (36 pages), Operating Instructions Manual (36 pages), Operating Instructions Manual (32 pages), Supplementary Instructions Manual (17 pages)
Print Page
Troubleshooting (Basic)
■
Display
The screen is disordered.
During Simultaneous
display, one of the screens
becomes disordered.
The external display does
not work normally.
<Only for model with GPS>
The cursor cannot be
controlled properly.
■
Screen Operation
The cursor does not work.
Cannot point the correct
position.
"Charm" does not always
appear by finger operation.
■
On-screen Document
The document of PDF
format is not displayed.
32
●
Changing the number of display colors and resolution may affect the screen. Restart the
computer.
●
Connecting/disconnecting an external display may affect the screen. Restart the
computer.
●
Resuming from sleep or hibernation may affect the screen of the external
display.
Restart the computer.
●
When using the Extended Desktop, use the same display colors for the external display
as those used by the LCD.
If you continue to experience problems, try changing the display.
Right-click on the desktop, and click [Graphics Properties].
●
Simultaneous display cannot be used until Windows startup is complete (during Setup
Utility, etc.).
●
If the external display does not support the power saving function, it may not work
normally when the computer enters the power saving mode. Turn off the external display.
●
Operate the following steps.
A Set [GPS] to [Disabled] in the [Advanced] - [Serial Port Settings] of the Setup Utility.
B Press F10 and select [Yes] at the confirmation message, and press
The computer will restart.
C Log on to Windows as an administrator.
D
1 . On the Start screen, flick from bottom side to inside of the screen, and click [All
apps] on the app bar.
2 . Click [Run] under "Windows System", input [c:\util\drivers\gps\GPS.reg] and click
[OK].
Click
(Start) and input "c:\util\drivers\gps\GPS.reg" in [Search programs and files],
and press
(Enter).
E Click [Yes], click [Yes] and click [OK].
Then restart the computer.
F Press F2 or Del while [Panasonic] boot screen is displayed.
G Set [GPS] to [Enabled] in the [Advanced] - [Serial Port Settings].
H Press F10 and select [Yes] at the confirmation message, and press
●
When using the external mouse, connect it correctly.
●
Restart the computer using the external keyboard.
●
If the computer does not respond to keyboard commands, read "No response."
( è page 33).
●
Perform the screen calibration ( è
●
Use the included pen.
●
On the Windows logon screen or the Welcome screen, you may not be able to point
the correct position using the included pen. Use the keyboard or the touch pad to
sign in /
●
Flick toward the center of the screen from the right edge or press and hold
button.
●
Use the included pen.
●
Install Adobe Reader.
A Log on to Windows as an administrator.
B Click
(Start) and input "c:\util\reader\en\P install.bat " in [Search programs and files]
then press
(Enter).
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help] -
[Check for Updates].
Reference Manual "Screen Input Operation").
log on.
(Enter).
(Enter).
(A5)