Panasonic DMC-F3P Service Manual - Page 11
Browse online or download pdf Service Manual for Digital Camera Panasonic DMC-F3P. Panasonic DMC-F3P 47 pages. User manual
Also for Panasonic DMC-F3P: Specifications (2 pages), Basic Operating Instructions Manual (28 pages)
Print Page
3.4.2.
INITIAL SETTINGS:
1. PURPOSE OF INITIAL SETTINGS:
There are two cases to perform the INITIAL SETTINGS.
1. Refresh the unit:The INITIAL SETTINGS can be used to erase all back up data.
(Not only user setting and image data stored in "Built-in Memory", but also clock data is reset.)
2. After replacing the MAIN P.C.B.:
(Since the model suffix data is not assigned for the MAIN P.C.B. being supplied as spare parts, model suffix has to be
assigned.)
After replacing the MAIN P.C.B., make sure to perform the "firmware version up", "adjustment" and "Initial settings" by ordering
the following procedure in accordance with model suffix of the unit.
2. IMPORTANT NOTICE:
Before proceeding Initial settings, make sure to read the following CAUTIONS.
3. PROCEDURES:
NOTE:
1. Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
2. To perform the Initial settings, adjustment software "DscCalDi" is required. The software together with installation instruction is
available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN system".
Step 1. Preparation:
1. After replacing the MAIN P.C.B., assemble the unit by referring the "7.Disassembly and Assembly Instructions".
2. Update the firmware of the unit.
The firmware together with version up procedure are available at "software download" on the "Support Information from
NWBG/VDBG-AVC" web-site in "TSN system".
3. Perform the adjustment using adjustment software "DscCalDi".
The adjustment software is available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN system".
4. Register the USB storage information.
Refer to the "8.4.6.USB STORAGE INFO. REGISTRATION" in "8.4.Adjustment procedures" section.
11