Aquatic AD504 Owners And Installation Manual - Page 7

Browse online or download pdf Owners And Installation Manual for Amplifier Aquatic AD504. Aquatic AD504 18 pages. 4/3/2 channel amplifier

Print Page

Getting Started

2.1 Contents

When first unpacking your new amplifier, please check first that the package

contains all the items below. If something is missing, contact the store where

you purchased the product.

4 -channel amplifier

Two (2) Output cable with connector

Four (4) stainless steel mounting screws

Four (4) mounting brackets with hardware included

Two (2) Cables for RCA input

Two (2) Cables for the Speaker Level

Owner's Manual

Maximum Power: 4 x 150W (2 Ohms) or 4 x 100W (4 Ohms)

Bridged Power 2 x 300W (4 Ohms)

Power and Protection LED

Line Inputs

Bridgeable/Trimode Operation

Variable Gain Controls (200mV to 10V)

Variable Low Pass Crossover & Fixed High Pass Crossover

Up to +18dB Variable Bass Boot

PCB with Conformal Coating

Waterproof IP67

Hardwired Input/Output and Speaker Cables

Signal-to-Noise Ratio: 90dB

Aquatic AV understands that amplifiers are placed in many different kinds

of installations, so we have included an input sensitivity control to help you

integrate the amplifier into your system regardless of the nature of your input

source and features both high pass and low pass crossovers.

Aquatic AV marine amplifiers are constructed using a special corrosion re-

sistant coating on the printed circuit board to prevent damage from the high

humidity.

In order to prevent the intrusion of water into the amplifier enclosure, we have

provided the connections at the end of the waterproof wires/cables, and tightly

grommeted the wires as they pass through the end panels. An additional

important and unique component is the rubber pad which seals all control

openings.

AD500.4 - 4/3/2 CHANNEL AMPLIFIER