Aquatic SWA6+ User & Installation Manual - Page 5

Browse online or download pdf User & Installation Manual for Subwoofer Aquatic SWA6+. Aquatic SWA6+ 18 pages. Combined bluetooth stereo subwoofer with full range speaker outputs

Print Page

Getting Started

1.3.1 Connections Diagram

8. Bluetooth Halo Aerial

Technology Connector

1.4 12-pin Harness Connection (retail packaged models only)

If your SWA6+ was purchased from an Aquatic AV dealer and/or supplied with retail packaging it

is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the power and

speakers. Please proceed to section 1.4.1.

If your SWA6+ was supplied as a pre-installed waterproof entertainment system it will utilise 3rd

party wiring connections and is not supplied with the Aquatic AV 12-pin Harness. Please proceed

to section 1.5

1.4.1 12-pin Harness Wiring Diagram

Left Speaker 1

Left Speaker 2

Right Speaker 1

Right Speaker 2

All open wire connections should be soldered and protected against water and dust for best long-term performance.

*Retail packaged models only.

www.aquaticav.com

(White/strip)

OPTIONAL

Combined Stereo Subwoofer SWA6+

Power On LED (Green)

Fuse Box

Power Antenna (7)

No lower than a 4 Ohm speaker should be

No lower than a 2 Ohm load should be used

used or damage may occur to the SWA6+.

or damage may occur to the Digital Media

Locker.

Make sure the polarity of speakers are

connected correctly.

Make sure the polarity of speakers are

connected correctly.

1. 12-pin Watertight Harness*

2. FM Radio Antenna Jack

3. RCA Auxiliary Outputs (Red & White)

4. RCA Auxiliary Inputs (Red & White)

5. 12V DC Triggers (Brown)

6. USB Input Connector

7. Wired Remote 8-pin DIN Connector

(Remote sold separately)

10. Power Attenuation Wires

(1x white, 1x black)