Aquatic Access IGMT Installation Manual - Page 8

Browse online or download pdf Installation Manual for Lifting Systems Aquatic Access IGMT. Aquatic Access IGMT 18 pages.

Print Page

SAFETY ITEM: It is imperative that the top mounting bolt extend through both cylinder walls

and through the square key tube. The lift may malfunction if the square key is not properly

engaged and injury could result.

Place turning handle in position and reinsert the 1/2" bolt through all three components. Place

locknut on end of bolt and tighten to snug.

WATER CONNECTION

Connect the water hose to the valve

and turn on the water supply. Do

not leave the water turned on when

the lift is not in frequent use.

Your IGMT pool lift operates using

normal household water pressures of

55-65 PSI. No electricity is used.

With sufficient water pressure and

proper installation, the IGMT will

lift a 300 lb. individual. If your

water pressure exceeds 70 PSI,

a reducer is necessary to prevent

damage to the lift. Although 55-65

PSI is required to lift the rated load,

less weight can be lifted wiht lower

pressures.

In low pressure situations, a pump can be added to boost pressure. If a pump is used, do not

use water from the swimming pool to power the lift. Chemicals from the pool water may

damage the internal components of the lift. Follow the pump manufacturer's instructions and

consult local building codes if you are installing a pump that exceeds 45 PSI. Never allow the

pump's pressure to exceed 70 PSI. Excessive pressure can damage the lift.

Some customers prefer to install a recessed water connection specifically for the lift. Place water

connection so that it doesn't interfere with the user's feet on rotation.

Turn the water on. Operate the control so that the seat tube/piston rod contracts into the cylinder.

Check for any leaks. If necessary, tighten valve. Rotate the seat to a position over the deck and

attach the seat with provided bolt. Secure with a lock nut and tighten snug.