Panasonic RX-DT670 Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Stereo System Panasonic RX-DT670. Panasonic RX-DT670 25 pages. Portable stereo component system
Also for Panasonic RX-DT670: Operating Instructions Manual (24 pages)
Print Page
REMOTE CONTROL OPERATION
I-------1
■ Operations
The following operations can be performed using the remote
control transmitter.
They are identical to the operations performed using the
main unit controls.
•Operation Switch
Turn the unit on and off.
(When using the battery power, you can only turn off.)
•CD operation
Selection of CD mode, sequential play, program play, direct
access play, repeat play, skip function, search function,
program clear, pause, stop, disc tray open/close.
•Radio operation
Selection of tuner mode, band switching, manual tuning, FM
auto tuning, memory presetting, memory tuner operation,
FM mode selection.
•Tape operation
Selection of tape mode.
•Volume control
Volume up/down
When operating the unit using the remote control
transmitter press the buttons on the remote control
transmitter slowly and accurately.
■ Inserting the remote control transmitter bat¬
teries
1. Open the cover of the battery case.
2. Insert the batteries.
Batteries used: Two R03//LR03 (UM-4 or equivalent, not
included).
■ Replacement interval of remote control trans¬
mitter batteries
Although the life of the batteries will vary depending upon
the number of times that the remote control transmitter is
used, the average life based on the used of the batteries is
about 1 year.
If the remote control transmitter fails to operate when it is
held near the unit, replace the batteries with new batter¬
ies, even if one year has not elapsed.
Precautions for using the remote control trans¬
mitter
•If the unit is exposed to direct sunlight, the remote
control transmitter may sometimes fail to function.
Be sure, therefore, to keep the unit out of direct
sunlight. In such case, the maximum range of the
remote control transmitter (approx. 7 m) may some¬
times be reduced.
•If strong light falls on the remote control sensor of
the unit (e.g. high frequency type fluorescent lamp),
the signals from the remote control transmitter may
fail to be received by the unit. In such a case, take
steps to prevent strong light from falling onto the
unit.
•If there is an obstacle between the remote control
transmitter and the unit, the signals from the remote
control transmitter will be blocked off, preventing
the unit from operating.
Use the remote control transmitter in a position
directly in front of the unit so that the remote control
sensor can be seen.
•Even if the remote control transmitter is not aimed
at the unit, the unit may sometimes operate when a
button on the remote control transmitter is pressed.
This is caused by the infra-red beam being reflected
off a wall, ceiling, floor, or furniture, and striking the
remote control transmitter of the unit.
•Do not operate the remote control transmitter of this
unit near a unit which is designed to operate using a
different remote control transmitter.
•Do not simultaneously use this remote control transmit¬
ter and one or more remote control transmitters in¬
tended either for the same type of unit or for another
type of unit, such as a television set.
•If you operate the remote control transmitter near the
unit when listening to an AM broadcast, noise may be
heard. In such a case, hold the remote control transmit¬
ter at a sufficient distance from the unit so that noise is
not heard.
•Do not disassemble the remote control transmitter or
touch any of the components inside it.
Do not place a heavy object on the remote control
transmitter or leave it exposed to direct sunlight or in a
hot location.
•Do not spill liquids on the remote control transmitter.
This may cause damage to the remote control trans¬
mitter.