Olympus OEP-5 Instructions Manual - Page 14
Browse online or download pdf Instructions Manual for Medical Equipment Olympus OEP-5. Olympus OEP-5 40 pages. Color video printer
Print Page
Chapter 3 Inspection Before Use
WARNING
Before each use, inspect this instrument as instructed
below. Inspect other equipment to be used with this
instrument as instructed in their respective instruction
manuals. Should the slightest irregularity be observed,
do not use this instrument and see "Chapter 7
Troubleshooting" in "INSTRUCTIONS
(ADVANCED)." If the irregularity is still observed,
contact Olympus.
Damage or irregularity may compromise the patient or
user safety, and may result in more severe equipment
damage.
3
Prepare this instrument and other equipment (shown in
"System Chart" on page 30 in the "Appendix") to be
used with this instrument for each particular case. Refer
to the respective instruction manuals for each piece of
ancillary equipment.
To disconnect the main power, unplug the AC IN
connector.
14
3.1 Inspection of the Power Supply
3.1 Inspection of the
Power Supply
1
Press the power switch to turn ON the color video
printer (OEP-5) (see Figure 3.1).
2
Confirm that the "PRINT" lamp and "ALARM"
lamp lights and then turns off (see Figure 3.1).
3
Press the power switch again.
4
Confirm that the LCD panel turns off.
PRINT lamp
ALARM lamp
LCD panel
Power switch
Figure 3.1
If the power fails to come on
If the power fails to come on, inspect according to
"Chapter 7 Troubleshooting" in "INSTRUCTIONS
(ADVANCED)."
If power still fails to turn ON, contact Olympus.