Alphacom Regency 605 User Manual - Page 11

Browse online or download pdf User Manual for Telephone Alphacom Regency 605. Alphacom Regency 605 18 pages. Regency range headsetphone

Print Page

12.

Setting up

12.1

The plug at the end of the telephone lead should be connected into a

telephone modular socket.

Warning – the calendar memory may be lost if the telephone is

disconnected from the telephone line.

12.2

Set the Ringer Volume switch on base unit to adjust the ringer the required

volume

12.3

Set the Ringer pitch switch on base unit to adjust the ringer the required

tone frequency.

12.4

If you are using a compatible switchboard, the message indicator light will

indicate if you have message waiting.

To use the message waiting facility you may need to move the message

switch (located at the rear of the phone) to MW1 or MW2 depending on

your pAbX. Consult your switchboard provider for more information.

12.5

If you are connected to TONE dialing exchange, set the switch to the TbR

(Timed break Recall) position to enable you to access certain Network

Services.

If you are connected to a puLSE dialing exchange, set the switch to ELR

(Earth Loop) position as recall has no function on direct lines connected to

such exchanges.(This will avoid the possibility of cutting off your call should

the recall button be pressed accidentally.)

If you are connected to a pAbX, set the switch according to the

requirements of your particular pAbX. If in doubt, consult your pAbX

Instructions or your pAbX maintainer.