Axor High Spout 38030XX1 Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Indoor Furnishing Axor High Spout 38030XX1. Axor High Spout 38030XX1 8 pages. Single control lavatory faucet

Re-set the high temperature limit stop (optional)
This step should be taken if the faucet is to be used by small
children or others who should be protected from scalding.
Pull out the screw cover, located on the
bottom of the handle.
Use a 3 mm allen wrench to loosen the
set screw 2 complete turns.
Pull off the nut cover and the green high temperature limit stop ring.
Reinstall the high temperature limit stop ring so that the black positioning pin
is in the notch corresponding to the desired high temperature. The
temperatures shown in the diagram assume an incoming cold water
temperature of 50
Center and replace the nut cover.
Replace the handle.
Tighten the set screw.
4
F and an incoming hot water temperature of 140
o
.
o