Epson 2180 - LQ B/W Dot-matrix Printer Manual - Page 14
Browse online or download pdf Manual for Printer Epson 2180 - LQ B/W Dot-matrix Printer. Epson 2180 - LQ B/W Dot-matrix Printer 30 pages. Impact printer
Also for Epson 2180 - LQ B/W Dot-matrix Printer: Specifications (2 pages)
Print Page
EPSON LQ-2180
8. Attach the front paper guide by sliding it along the
printer's mounting slots as shown below. Then close the
front paper guide.
9. Slide the edge guides to the middle of the top paper guide.
Make sure that the printer cover and the paper guide cover
are closed.
Note:
Always close the printer cover before printing. The printer does
not print when the cover is open.
10. Turn on the printer. You may need to check and change the
printer driver settings. When the printer receives data, it
automatically loads the paper and starts printing. The
printed pages are fed over the paper guide toward the back
of the printer.
14 - EPSON LQ-2180
edge guides
2/99
11. After you finish printing, follow the steps in the next section
to tear off your printed document.
If the first printed line on your page appears too high or
low, you can fix this using the micro adjust feature as
described in "Adjusting the Top-of-Form Position" on
page 22.
Caution:
Never use the knob to adjust the top-of-form position
while the printer is turned on; this may damage the
printer or cause it to lose the top-of-form position.
The knob can be used when the printer is turned
off only.
Removing the printed document from the front
push tractor
To remove the printed document, follow these steps:
1. Make sure the
Tear/Off Bin
indicates that your paper is at the current tear-off position.)
You may need to press the
the paper to the tear-off position.
2. Open the paper guide cover, and tear off the printed
document using the tear-off edge of the printer.
Note:
If your paper's perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the micro adjust
feature. See "Adjusting the tear-off position" on page 23.
Caution:
Never use the knob to adjust the tear-off position while
the printer is turned on; this may damage the printer or
cause it to lose the tear-off position. The knob can be
used when the printer is turned off only.
3. Close the paper guide cover.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and starts printing.
lights are flashing. (This
button to advance
Tear Off/Bin