Epson AcuLaser C9100 Setup Manual - Page 21

Browse online or download pdf Setup Manual for Printer Epson AcuLaser C9100. Epson AcuLaser C9100 33 pages. Color laser printer
Also for Epson AcuLaser C9100: Paper Jam Manual (4 pages)

Print Page

If the value for each color is zero, proceed to step 13.

Otherwise, proceed to step 5 to adjust the color

registration.

5. Make sure the LCD panel shows Ready or Sleep, then

press the

6. Press the

Regist Menu, then press the

7. Press the

color you need to adjust, then press the

button.

For example, to adjust the cyan registration, press the

Down button several times until the LCD panel

displays

C=Lx, Cx, Rx, then press the

Note:

Y, M, and C displayed in the LCD panel indicate Yellow,

Magenta, and Cyan, respectively.

8. Set the values for the colors (Yellow, Magenta, and

Cyan) measured in Chart A.

For example, to enter the value for Cyan at "Left", press

the

measured in Chart A. After setting the value for L (Left),

press the

(Center) with the same procedure. Then, set the value

for R (Right) and press the

9. Repeat steps 7 and 8 to enter the values (Left, Center,

and Right) for M (Magenta).

10. Repeat steps 7 and 8 to enter the values (Left, Center,

and Right) for Y (Yellow).

11. After the adjustment is complete, press the Start button

to exit the control panel menus.

12. Repeat steps 1 to 3 to print a Color Registration

Adjustment Sheet for confirmation.

Testing the Printer

Enter button.

Down button several times to display Color

Down button several times to display the

Down button several times to enter the value

Enter button, and set the value for C

Enter button.

Enter