Archer Wireless RSQ-22000 User Manual - Page 3

Browse online or download pdf User Manual for Headsets Archer Wireless RSQ-22000. Archer Wireless RSQ-22000 7 pages.

Print Page

LOW BATTERY WARNING

When the headset is on and the battery becomes low, the RED LIGHT will flash to remind

you the headset needs to be recharged. Recharge the battery as described above.

II.

SWITCHING YOUR HEADSET ON/OFF

To turn your headset on, press & hold "Function button" & "Volume – button" simultaneous

For 2 seconds. The GREEN LED light will quick flash three times, and goes to stand-by

mode. The indicator light will flash green every 2-3 seconds whilst the headset is on.

To turn your headset off, press & hold "Function button" & "Volume – button" simultaneous

for 2 seconds, The RED LED light will then flash 3 times & goes to OFF mode.

III.

Prior to using your headset for the first time, you MUST pair it with another BLUETOOTH

device, such as a mobile telephone. The Bluetooth connection between the headset and your

phone can be established by setting up a paired link. With a paired link, the phone

remembers the headset's ID, and these 2 items are then 'paired' together – eliminating the

need to repeat the set up process with future use. Only paired devices can utilize

Auto-Answer and Auto-Transfer functions. The information below describes pairing

instructions for a typical device. For specific instructions, refer to your mobile telephone

user guide.

PAIRING PROCEDURE.

1. Switch off your headset & turned on your cell phone, place the headset and

telephone where they are easily viewable. Make sure the Bluetooth feature of your

telephone is turn on.

2. On your headset (under off mode), Press & hold "FUNCTION button" & "volume –

button" simultaneous for 5 seconds. (The Green LED light will flash 3 times after 2

seconds, then 3 seconds later, The Red LED light will flash), then release the

"Function button" & "Volume – button", and wait about 2 seconds, Afterwards the

Green LED will turn on and RED LED light will flash. Your headset is now entering

into pairing mode & will remain discoverable by other BLUETOOTH devices for

60 seconds.

3. On your cell phone, search for devices by selecting DISCOVER from the Bluetooth

options menu. Check your mobile telephone display and follow the instruction.

4. Select BH220 on the menu of you phone, Enter the passkey 1234, when your phone

menu prompts you, and the phone will start to pair the headset with the phone (the