Epson C11CE91301 Installation Manual - Page 43

Browse online or download pdf Installation Manual for Printer Epson C11CE91301. Epson C11CE91301 47 pages.

Print Page

Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and

5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band,

give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home

Network 5 GHz. See your router documentation or contact your internet service provider for

instructions.

Parent topic:

Product Does Not Appear in OS X Printer Window

If your product does not appear in the OS X printer window, try these solutions:

• Turn your product off, wait 30 seconds, then turn it back on again.

• If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi icon on your

product's LCD screen is not lit, make sure you select one of the WPS options from the product control

panel within 2 minutes of pressing the WPS button on your router.

• If you are connecting the product wirelessly via EpsonNet Setup and the Wi-Fi icon does not appear lit

on your LCD screen, make sure your product software was installed correctly. If necessary, reinstall

your software.

Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and

5 GHz) mode. See your router documentation for instructions.

Parent topic:

If you cannot print over a network, try these solutions:

• Make sure that your product is turned on.

• Make sure you install your product's network software as described in your product documentation.

• Print a network status sheet and verify that the network settings are correct. If the network status is

Disconnected, check any cable connections and turn your product off and then on again.

• If you are using TCP/IP, make sure the product's IP address is set correctly for your network. If your

network does not assign IP addresses using DHCP, set the IP address manually.

• Make sure your computer and product are both using the same wireless network.

• If network printing is slow, print a network status sheet and check the signal strength. If it is poor, place

your product closer to your router or access point. Avoid placing your product near a microwave oven,

2.4 GHz cordless phone, or large metal object, such as a filing cabinet.

Solving Network Problems