Epson DFX-5000+ Product Support Bulletin - Page 2

Browse online or download pdf Product Support Bulletin for Printer Epson DFX-5000+. Epson DFX-5000+ 3 pages. Product support bulletin(s)
Also for Epson DFX-5000+: Brochure & Specs (24 pages), Product Support Bulletin (20 pages), Product Support Bulletin (3 pages), Product Information (5 pages), Product Support Bulletin (5 pages), Manual (8 pages), Product Support Bulletin (20 pages), Product Support Bulletin (14 pages), Product Support Bulletin (25 pages), Product Support Bulletin (16 pages), Product Support Bulletin (8 pages), Product Support Bulletin (2 pages)

Print Page
Epson DFX-5000+ Product Support Bulletin
6.
Clean the plate and the end of the CGS. Lube the assembly with light
machine oil (Epson 02 oil).
7.
Do the same for the right side by first removing the carrage motor.
8.
Remove the E ring and spring that attaches the "Guide shaft holding lever" or
clutch plate.
9.
Mark the parallelism adjustment plate and remove the two screws that attach it.
10. Clean the plates and the end of the CGS. Lube the assembly with light machine oil
11. Assemble in reverse order, do the PGM backlash adjustment, check and perform
the parallelism adjustment if necessary and test.
PSB No: P-0102
Page: 2 of 2
Figure 1