Sharp 15JF-25S Service Manual - Page 2

Browse online or download pdf Service Manual for TV Sharp 15JF-25S. Sharp 15JF-25S 37 pages.

Print Page

•Power Input .................... 220V-240 Volts AC 50Hz

•Power Consumption

Normal Operation (Method IEC60107) ............ 37W

Stand-by Operation ............................................ 3W

•Audio Power Output Rating ........................ 2 W (MPO)

Speaker .............................. 16

•Convergence ............................... Self Converging System

•Focus ....................... High Bi-Potential Electrostatic

•White Level

Set brightness control to get total picture tube cathode current of 1000 µA under no signal condition.

Maximum necessary correction of each picture tube cathode current to get 8550 degrees K+1 MPCD

screen temperature should not exceed 15% of its original value.

The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug

and power receptacle, when servicing this chassis.

To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to

qualified service personnel.

ELECTRICAL SPECIFICATIONS

Ω,

4W, 9 x 5 cm, 1pc

X=0.290 ± 0.015

Specifications are subject to change without prior notice.

MODEL DESTINATION (Operation Manual languages)

15JF-25S: Deutsch, Nederlands, Français.

15JF-25SIT: Italiano.

•Sweep Deflection ..................................... Magnetic

•Picture Intermediate frequency ................. 38.9 MHz

•Sound Carrier Trap .................................. 33.4 MHz

•Adjacent Sound Carrier Trap ................... 40.4 MHz

•Adjacent Picture Carrier Trap ................. 31.9 MHz

•Aerial Input Impedance

VHF/UHF ...................... 75 ohm Unbalanced

•Tuning Ranges........... 48.25 MHz thru 855.25 MHz

VHF: CH02 - CH12

S1 - S41 (Hiperband)

UHF: CH21 - CH69 CH

Y=0.300 ± 0.015

WARNING

15JF-25S