Sharp Notevision XG-C335X Setup Manual - Page 19

Browse online or download pdf Setup Manual for Projector Sharp Notevision XG-C335X. Sharp Notevision XG-C335X 45 pages. 3-lcd conference / classroom data-video projectors
Also for Sharp Notevision XG-C335X: Specification Sheet (2 pages), Service Manual (22 pages)

Print Page

1. Connecting the Pro-

jector to a Computer

Establishing a one-to-one connection from the

projector to a computer. Using a LAN cable

(Category 5, cross-over type) you can config-

ure the projector via the computer.

Disconnect the computer's LAN

cable from the existing network.

Connect a LAN cable (a UTP

cable, Category 5, cross-over

type) to the projector's LAN ter-

minal and connect the other end

of the cable to the computer's

LAN terminal.

Plug the power cord into the AC

socket of the projector.

Turn on the computer.

Info

Confirm that the LINK LED on the rear of the

projector illuminates. If the LINK LED does not

illuminate, check the following :

• The LAN cable is properly connected.

• The power switches of both the projector

and the computer are on.

This completes the connection. Now proceed to "2. Setting an IP Address for the Com-

puter".

Setting up the Projector Network Environment

A LAN cable being

connected to the network

(cross-over type, commercially available)

LAN cable

-19