Samsung 220WM - SyncMaster 22" LCD Monitor Owner's Manual - Page 39

Browse online or download pdf Owner's Manual for Monitor Samsung 220WM - SyncMaster 22" LCD Monitor. Samsung 220WM - SyncMaster 22" LCD Monitor 49 pages. Widescreen lcd monitors
Also for Samsung 220WM - SyncMaster 22" LCD Monitor: Specifications (2 pages)

Print Page
Samsung 220WM - SyncMaster 22
How can I set the Power Saving
function?
How can I clean the outer
case/LCD Panel?

Self-Test Feature Check

Self-Test Feature Check
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.
Self-Test Feature Check
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
This box appears during normal operation if the video cable becomes disconnected or
damaged.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.

Warning Messages

If there is something wrong with the input signal, a message appears on the screen or the
screen goes blank although the power indicator LED is still on. The message may indicate
that the monitor is out of scan range or that you need to check the signal cable.

Environment

The location and the position of the monitor may influence the quality and other
features of the monitor.
1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer
to another room.
2. Remove all electronic devices such as radios, fans, clocks and telephones that are
within 3 feet (one meter) of the monitor.
Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
computer or the screen saver. (Refer to Windows/Computer
Manual).
Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the case.
Do not allow any water to go inside the monitor.
|
Warning Messages
|
Environment
|
Useful Tips