Samsung 50 Series Manual - Page 12

Browse online or download pdf Manual for Monitor Samsung 50 Series. Samsung 50 Series 39 pages.

Print Page

OSD Adjustment (Picture)

McgicAngle

Cocrse

Fine

HDMI Blcck

Level

This feature allows you to see optimal screen quality according to your viewing position

• <Off>

①

:Select when viewing from the front position.

• <Lean Back Mode 1>

②

:Select when viewing from a slightly lower position

③

• <Lean Back Mode 2>

:Select when viewing from the lower position

• <Standing Mode> :Select when viewing from the upper position

④

• <Side Mode> :Select when viewing from the left or right position

⑤

• <Custom> : When this function is selected ,setting for <Lean Back Mode 1> is applied by default .Users can

set suitable picture quality as needed

• <Group View Mode> :Select when two or more person view among

This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> mode.

This menu is unavailable when <MagicColor> or <Color Effect>is set.

Removes vertical noise lines (line pattern) from the screen.

The location of the screen may be changed after the adjustment. In this case, move the screen so that the

screen is displayed at the center of the display panel using the <H-Position> menu.

This function is only available in analog mode.

Removes horizontal noise lines (line pattern) from the screen.

If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the

<Fine> function again.

This function is only available in analog mode.

When watching with a DVD or set-top box connecting to the product via HDMI, image quality deterioration

(black level, lower-quality contrast, lighter color tone, etc.) may occur depending on the connected

external device.

• <Normal>

• <Low>

This function is active only when the external device is connected via <HDMI>. The <HDMI

Black Level> function may not be compatible with all external devices.

① ④ ⑤

position at the same time.