Siemens CM778GN.1B User Manual And Installation Instructions - Page 17
Browse online or download pdf User Manual And Installation Instructions for Oven Siemens CM778GN.1B. Siemens CM778GN.1B 48 pages.
To prevent condensation, when the microwave power
setting is 600 watts and 900 watts, the appliance auto-
matically switches on a heating element. The cooking
compartment and the accessories become hot. The
cooking result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
→ "Basic settings", Page 23
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
Never touch the inside surfaces of the cooking com-
▶
partment or the heating elements while they are hot.
Keep children at a safe distance.
▶
Added microwave
Adding microwave to an operating mode reduces the
cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 13
– 4D hot air
– Top/bottom heating
– Circulated air grilling
– Grill, large area
– Grill, small area
¡ Meals → Page 20
¡ Meat probe → Page 18
¡ Crisp Finish → Page 18
The potential microwave power settings in combination
with an operating mode are:
¡ 90 watts
¡ 180 watts
¡ 360 watts
11.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Page 16
Press "Microwave".
1.
Or select the microwave directly using the
‒
ton.
Press the required microwave output setting.
2.
Press "Cooking time".
3.
A cooking time must always be set in order to oper-
ate the microwave.
To change the preset cooking time, press the relev-
4.
ant time value, e.g. minute display "min" or second
display "s".
a The selected value is marked in blue.
Set the cooking time using the adjustment line or
5.
enter it directly via the number field
If required, use
to reset the adjustment value.
Use "Start" to start the operation.
6.
a The microwave starts and the cooking time counts
a Once the cooking time has elapsed, a signal tone
7.
8.
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 23
Changing the microwave output setting
You can change the microwave output at any time.
1.
2.
3.
Changing the cooking time
You can change the cooking time at any time.
1.
2.
3.
11.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 11
¡ → "Cookware and accessories with microwave",
Requirement: Observe the information about the re-
spective operating mode.
→ "Setting options with the microwave", Page 16
but-
1.
2.
3.
4.
5.
6.
a The appliance starts to heat and the time counts
a Once the cooking time has elapsed, a signal tone
.
7.
down. The display shows the performance reduction
→ "Microwave output settings", Page 11 for the
maximum microwave output. "Boost"
sounds. A notification appears on the display con-
firming that the operation has finished.
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
→ "Drying", Page 29
Press the microwave output setting.
Change the microwave output setting.
Press "Apply".
Press the cooking time.
Change the cooking time using the adjustment line
or enter it directly via the number field
Press "Apply".
Page 16
Press the operating mode that you require.
Implement the settings for the operating mode, e.g.
type of heating and temperature.
Press "Added microwave"
Press the required microwave output setting.
Press "Cooking time" and set the cooking time.
Use "Start" to start the operation.
down.
sounds. A notification appears on the display con-
firming that the operation has finished.
Once the cooking time has elapsed:
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Microwave en
to switch the ap-
.
.
to switch the ap-
17