ACD DS210 Series Brief Overview - Page 11

Browse online or download pdf Brief Overview for Handhelds ACD DS210 Series. ACD DS210 Series 15 pages.
Also for ACD DS210 Series: Hardware Documentation (20 pages)

Print Page

The M210SE battery is a lithium ion battery pack. Lithium ion

battery packs can explode if exposed to fire. Do not disassemble

the battery pack and do not expose it to fire or heat (greater than

ATTENTION

60°C).

Only operate the touchscreen using the fingertips or with the

touch-pen attached to the retainer strap on the rear. Never use a

pen or other sharp objects.

ATTENTION

•

Never position the device in close proximity to heat sources

(heating fans or similar equipment) and never expose it to direct

sunlight, excessive dust sources or shocks.

ATTENTION

•

This is a Class A device. This device can cause radio interferences

in living areas.

In this case, the operator may be requested to implement

NOTE

appropriate measures.

4 Prior to the initial commissioning of the M210SE

In order to ensure that the battery inserted into the device at the factory is fully charged, insert the device into

the supplied DS210 docking station (if included in the scope of delivery), also see Point 5. Using the supplied

power supply unit, connect the docking station to the mains (Power LED shows a green light), also see

Point 5.

The battery charging process has been completed when the 'CHARGE' LED shows a green light.

You can now use the M210SE handheld terminal.

5 Handling of the device and docking station

5.1 Charging the power supply unit for the DS210 & M210SE

The M210SE and the spare battery may only be charged in the DS210 docking station with respective

power supply unit.

•

External power supply unit for DS210

• Input voltage

• Output voltage

•

Power cable (country-specific)

M210SE_Set_Kurzübersicht_V1 03_de_en.doc

100 - 240V AC; 0.8A; 50 - 60 Hz

15V DC; 2.4A

11 / 15