Siemens EH....FE.. Instruction Manual - Page 14
Browse online or download pdf Instruction Manual for Hob Siemens EH....FE... Siemens EH....FE.. 20 pages.
Indicator
Function
™‡
Duration of the time program function warning signal
‚
10 seconds*.
30 seconds.
ƒ
1 minute.
„
™ˆ
Power-Management function
‹
= Deactivated.*
= 1,000 W. minimum power.
‚
‚
.= 1,500 W.
= 2,000 W.
ƒ
etc.
or
. = maximum power of the hob.
Š
Š
Hotplate time selection
™Š
Unlimited: the last hotplate programmed remains selected.*
‹
‚
Limited: The hotplate will only remain selected for 10 seconds.
Return to basic settings
™‹
Personal settings.*
‹
Return to factory settings.
‚
*Factory settings
Accessing the basic settings
The hob should be turned off.
Switch on the hob using the main switch.
1.
Within the next 10 seconds, press and hold the
2.
for 4 seconds.
In the display
and
alternately light up and
™
‚
a default setting.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
■
Dishwasher detergent
■
Abrasive products
■
14
Press the
3.
indicator appears.
Then select the desired setting with the programming zone.
4.
symbol
'
Press and hold the
5.
4 seconds.
The settings will have been correctly saved.
lights up as
‹
Quit
To leave the basic settings, turn off the hob at the main switch.
Corrosive products such as oven sprays or stain removers
■
Sponges that may scratch
■
High-pressure or steam cleaners
■
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
'
symbol several times until the desired function
symbol again for more than
'