Cisco Unified 7900 Series System Manual - Page 34

Browse online or download pdf System Manual for IP Phone Cisco Unified 7900 Series. Cisco Unified 7900 Series 36 pages. Release notes for firmware release 9.3(1)sr2
Also for Cisco Unified 7900 Series: System Manual (50 pages), Solution Manual (10 pages), Release Notes (20 pages), User Manual (11 pages)

Print Page

Where to Find More Information

Table 43-6

Phone Configuration Checklist for SIP Protocol (continued)

Configuration Steps

Step 8

Add and configure lines (DNs) on the phone. You can also

configure phone features such as call park, call forward, and call

pickup.

Step 9

Configure speed-dial buttons.

You can configure speed-dial buttons for phones if you want to

provide speed-dial buttons for users or if you are configuring

phones that do not have a specific user who is assigned to them.

Users can change the speed-dial settings on their phones by using

Cisco Unified CallManager User Options.

Step 10

Configure Cisco Unified IP Phone services.

You can configure services for Cisco Unified IP Phone models

7970/71, 7960/61, 7940/41, 7912, 7911, and 7905 and Cisco IP

Communicator if you want to provide services for users or if you

are configuring phones that do not have a specific user who is

assigned to them. Users can change the services on their phones

by using the Cisco Unified CallManager User Options window.

Step 11

Customize phone button templates and softkey templates, if

required. Configure templates for each phone.

Step 12

Configure the Busy Lamp Field feature, if required. You must use

customized phone button templates to configure BLF/SpeedDial

buttons.

Step 13

Assign services to phone buttons, if required.

Step 14

Provide power, install, verify network connectivity, and configure

network settings for the Cisco Unified IP Phone.

Step 15

Associate user with the phone (if required).

Step 16

Make calls with the Cisco SIP IP Phone.

Where to Find More Information