Ricoh PRO C9100 Read This First Manual - Page 33
Browse online or download pdf Read This First Manual for Printer Ricoh PRO C9100. Ricoh PRO C9100 40 pages.
Also for Ricoh PRO C9100: Notes For Users (2 pages), Quick Troubleshooting Manual (5 pages)
3. Other Information for This Machine
This chapter describes laws and regulations related to this machine.
Laws and Regulations
Legal Prohibition
Do not print any item for which reproduction is prohibited by law.
Printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its
completeness or accuracy. If you have any questions concerning the legality of printing certain items,
consult with your legal advisor.
Laser Safety
This machine complies with the requirements of IEC60825-1:2007 (EN60825-1:2007) for class 1
laser product. The machine contains four VCSELs (Vertical Cavity Surface Emitting Laser), 772–792
nanometer wavelength. The beam divergence angle is 5.5 degrees (minimum) and 7.9 degrees
(maximum) in the vertical direction, and 5.5 degrees (minimum) and 7.9 degrees (maximum) in the
horizontal direction, and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has
forty light sources and the maximum output power of each light source is 1.23 milliwatt.
Caution
Use of controls or adjustments or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Laser Safety for Media Identification Unit Type S3
Media Identification Unit (optional) complies with the requirements of IEC60825-1:2007
(EN60825-1:2007) for class 1 laser product. Media Identification Unit contains one VCSEL (Vertical
Cavity Surface Emitting Laser), 772–792 nanometer wavelength. The beam divergence angle is 5.3
degrees (minimum) and 7.9 degrees (maximum) in the vertical direction, and 5.3 degrees (minimum)
and 7.9 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous
Wave (CW) mode. The VCSEL has twelve light sources and the maximum total output power is 2.5
milliwatt.
The following label is attached on the bottom of the machine.
31