Ricoh SP 100 e Product Support Manual - Page 4
Browse online or download pdf Product Support Manual for Printer Ricoh SP 100 e. Ricoh SP 100 e 19 pages. Black & white multi function laser printer
Also for Ricoh SP 100 e: Brochure & Specs (2 pages), Specifications (2 pages)
Print Page
Installation
Installation Requirements
Temperature Range:
Humidity Range:
Ambient Illumination:
Ventilation:
Ambient Dust:
Avoid areas exposed to sudden temperature changes:
Do not place machine where it will be exposed to corrosive gas or vapor.
Do not install the machine at any location over 2,000m (6,562 ft.) above sea level.
Place the machine on a strong and level base. Inclination on any side should be no more than 5mm (0.2")
Do not place the machine where it may be subject to strong vibrations.
Machine level
Power Requirements
Input voltage level: 110 - 120 V, 60Hz: 6A
Do not place anything on power cord.
The required wall outlet is a NEMA 5-15R
Space
Foot Print
Dimensions (W x D x H):M101: 402 x 368.5 x 119 mm (15.83" x 14.51" x 4.69".)
Note: Measuring conditions: Front door closed. Rear vertical paper tray, not extended.
Ver.1.0
Product Support Guide
Model M101 / M102 / M103
15 C to 25 C (59 F to 77 F)
30% to 70% RH
Less than 2,000 lux (do not expose the AIO to strong light, especially direct
sunlight)
3 times/hr/person
Less than 0.075 mg/m
Areas directly exposed to cool air from an air conditioner.
Areas directly exposed to heat from a heater.
Front to back: within 5mm (0.2") of level
Right to left: within 5mm (0.2") of level
(receptacle)
M102: 402 x 368.5 x 163 mm (15.83" x 14.51" x 6.42".)
M103: 402 x 368.5 x 205 mm (15.83" x 14.51" x 8.07".)
Page 4 of 18
Subject to change without notice
3
3
(2.0 x 10-6oz/yd
)
A (Front)
B (Left)
C (Rear)
D (Right)
400mm (16")
100mm (4")
200mm (8")
100 mm (4")
6/26/2012