Cisco 3800 Series Configuring - Page 11

Browse online or download pdf Configuring for Network Router Cisco 3800 Series. Cisco 3800 Series 32 pages. Password recovery procedure
Also for Cisco 3800 Series: Datasheet (8 pages), Application Note (41 pages), Troubleshooting Manual (15 pages), Datasheet (20 pages), Quick Start Manual (40 pages), User Manual (7 pages)

Print Page
Cisco 3800 Series Configuring
Configuring Radio Settings on an Access Point
•
•
•
•
The maximum legal transmit power is greater for some 5-GHz channels than for others. When the access
point randomly selects a 5-GHz channel on which power is restricted, the access point automatically
reduces transmit power to comply with power limits for that channel.
Cisco recommends using the world-mode dot11d country-code interface configuration command to
Note
configure a country code on DFS-enabled radios. The IEEE 802.11h protocol requires access points to
include the country information element (IE) in beacons and probe responses. By default, however, the
country code in the IE is blank. Use the world-mode command to populate the country code IE.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface dot11Radio interface
Example:
Router(config)# interface dot11Radio 0/3/1
128 (5640 MHz)
132 (5660 MHz)
136 (5680 MHz)
140 (5700 MHz)
enable
configure terminal
interface dot11Radio interface
dfs band frequency-group block
end
show controllers dot11Radio interface
copy running-config startup-config
How to Configure Radio Settings on an Access Point
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enters interface configuration mode.
The interface argument is in module/slot/port format,
•
except for the Cisco 1800 series fixed-configuration
routers, where the interface argument is either 0 or 1.
•
The 5-GHz radio is port 1.
11