Cisco UC500 series Configuration Manual - Page 22

Browse online or download pdf Configuration Manual for Conference System Cisco UC500 series. Cisco UC500 series 50 pages. Sip trunking unified communications 500 series

Print Page

1. Configuration Guide
2. Introduction
3. Installation
4. Initial Configuration
5. Access Uc500 Via Cli

4.3.13a Click

"Internet Connection"

from the left panel to configure the WAN interface

with a appropriate WAN IP address option. This is a

mandatory

step when using CCA

for UC500 configuration. Click the

"FastEthernet 0/0"

interface and then the

"Modify"

button. In this example – a static IP is being used (1.1.100.4). However, based on the

network setup, DHCP can also be used as well as PPPoE for DSL. Click

"OK"

to go back

to the Internet Connection pane.

Figure 4.3.13a WAN connection

Click

"OK"

to continue.