Sony PMW-100 Operating Instructions Manual - Page 27

Browse online or download pdf Operating Instructions Manual for Digital Camera Sony PMW-100. Sony PMW-100 31 pages. Solid-state memory camcorder
Also for Sony PMW-100: Brochure & Specs (8 pages), Brochure & Specs (6 pages), Getting Started (2 pages), Operating Instructions Manual (32 pages)

Sony PMW-100 Operating Instructions Manual
Focus area
Auto/manual switchable
10 mm to ∞ (wide end)
800 mm to ∞ (tele end)
Iris
Auto/manual switchable
F1.8 to F2.9
Picture stabilizing function
ON/OFF possible, shift-lens system
Filter thread
M 37mm, pitch 0.75 mm

Camera Block

Pickup device
1/2.9-inch single-chip "Exmor" CMOS
image sensor
Effective picture elements
1920 (H) × 1080 (V)
Minimum subject illumination
0.40 lx (typical) (1920 × 1080/59.94i,
F1.8, +18 dB, 64-frame accumulation,
lens: wide end)
Shutter speed
1/32 ~ 1/2000 sec.
Slow Shutter (SLS/EX SLS)
2, 3, 4, 5, 6, 7, 8, 16, 32, 64 frames
Slow & Quick Motion
720p: 1 ~ 60 frames, 1 ~ 50 frames (for
PAL Area, UDF)
1080p: 1 ~ 30 frames, 1 ~ 25 frames (for
PAL Area, UDF)
White balance
Preset mode (3200K), Memory A mode,
Memory B mode/ATW mode
Gain
–3, 0, 3, 6, 9, 12, 18 dB, AGC

Inputs/Outputs

Audio input
XLR type 3-pin (2), female, LINE/MIC/
MIC+48V switchable
LINE: +4 dBu
MIC: -70 dBu to -30 dBu
(Reference input level 0 dBu=0.775
Vrms)
Video output
BNC type (1), switchable with
GENLOCK IN connector, HD-Y/
composite signal
1.0 Vp-p, 75 Ω
AV multi-output
AV multi-connector (1), audio output,
composite signal
Audio: -10 dBu (Under 47 kΩ load,
reference level)
Analog composite signal: NTSC or PAL
SDI output
BNC type (1), switchable with HD-SDI/
SD-SDI
SMPTE292M/259M
i.LINK
IEEE 1394, 4-pin connector (1), HDV
(HDV 1080i) / DV input/output, S400
Timecode input
BNC type (1), switchable with TC OUT
connector
0.5 V to 18 Vp-p, 10 kΩ
Timecode output
BNC type (1), switchable with TC IN
connector
1.0 Vp-p, 10 kΩ
GENLOCK input
BNC type (1), switchable with VIDEO
OUT connector
1.0 Vp-p, 75 Ω
USB
mini-B (1)
Specifications
27