Sony XCD-U100CR Service Manual - Page 17

Browse online or download pdf Service Manual for Digital Camera Sony XCD-U100CR. Sony XCD-U100CR 30 pages. Digital camera module
Also for Sony XCD-U100CR: Manual (4 pages), Technical Manual (38 pages), Technical Manual (39 pages), Operating Instructions (2 pages)

Print Page

2-2-1. Black and White (B/W) Camera

(XCD-U100/SX90/V60)

1. Shoot the pattern box in the center of the window

through the clear chart at the wide end.

2. Start the IIDC_CAM**** software.

3. Click WFM (Waveform Monitor) in the menu.

The waveform is displayed.

WFM

4. Start the IIDC_CAM**** software.

The IIDC control window is displayed.

5. Set the lens iris to F1.4. (Zoom at the full angle of

field)

XCD-U100/SX90/V60

XCD-U100CR/SX90CR/V60CR

xxxxxxxx

6. Click the Exposure tab and adjust the shutter in the

window so that the Green level reaches close to 100%

(does not exceed 100% (236)) in the WFMwindow.

The shutter value (reference value) at which the Green

level reaches close to 100% on WFM is as follows.

XCD-V60:

XCD-SX90: 19

XCD-U100: 19

Exposure tab

7. Click the "Adjust" tab in the IIDC control window.

[Gain0dB] button

8. Click the [Gain0dB] button.

The Gain 0dB adjustment is performed.

9. Check that the adjustment level (Y) satisfies the

specification A.

A = 235 1 step

If the specification A is not satisfied, perform the

procedure from step 1 again.

10. After the adjustment is completed, click the [Write]

button and write the adjustment value.

Green level

[Write] button

xxxxxxxx

2-3