ACU-RITE SENC 150 Instructions Manual - Page 6

Browse online or download pdf Instructions Manual for Media Converter ACU-RITE SENC 150. ACU-RITE SENC 150 12 pages. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Also for ACU-RITE SENC 150: Installation Manual (8 pages), Reference Manual (20 pages), Installation Manual (4 pages), Installation Manual (6 pages)

Print Page

3 Removing the encoder

Removing the reading head screws

 Do not remove any mounting brackets unless it is completely

unavoidable.

 Remove the two reading head mounting fasteners.

Removing the center support

Center

support

 Remove the fastener from the center support if one is

present.

M4 x 25 mm SHCS low head

(8-32 x 5/8" SHCS low head)

(8-32 x 3/4" SHCS low head)

M6 x 25 mm

(1/4"-20 x 3/4" BHCS)

M6 flat washer

SENC 150 Reading Head Replacement Instructions

Removing the end hole or set screws

M6 x 25 mm

(1/4"-20 x 3/4" BHCS)

M6 flat washer

 Remove the end hole mounting fasteners unless encoder is

spar mounted, then loosen the set screws and remove the

scale case from the spar.

Removing the end cap(s)

spring clip

 The reading head can be removed from either end. The view

shown is for illustration only. Use caution not to lose the

spring clip during the end cap removal.

set screws