Cisco PIX-515E Quick Start Manual - Page 32

Browse online or download pdf Quick Start Manual for Network Hardware Cisco PIX-515E. Cisco PIX-515E 42 pages. Security appliance
Also for Cisco PIX-515E: Quick Start Manual (42 pages)

Print Page

Alternative Ways to Access the PIX 515E

You can access the CLI for administration using the console port on the PIX Firewall. To do so, you

must run a serial terminal emulator on a PC or workstation

Connect the blue console cable so that you have a DB-9 connector on one end as required by

Step 1

the serial port for your computer, and the RJ-45 connector on the other end.

Use the console port to connect to a computer to enter configuration commands. Locate

Note

the blue console cable from the accessory kit. The blue console cable assembly consists of

a null-modem cable with RJ-45 connectors and a DB-9 connector.

Connect the RJ-45 connector to the PIX 515E console port, and connect the other end to the

Step 2

serial port connector on your computer.

100 Mbp s

Link

FDX

10/1 00 ETH ER NE T 0/0

RJ-45 to DB-9

serial cable

(null-modem)

• If your PIX 515E has a four-port Ethernet circuit board already installed, the Ethernet

circuit boards are numbered as shown in the illustration below. The four-port Ethernet

circuit board is required to access the PIX 515E unrestricted license.

FAIL OVE R

CO NS OLE

Console

port (RJ-45)

PC terminal adapter DB-9