Cisco UCS B200 M3 Installation And Service Note - Page 24

Browse online or download pdf Installation And Service Note for Server Cisco UCS B200 M3. Cisco UCS B200 M3 28 pages. Blade server
Also for Cisco UCS B200 M3: Installation Manual (34 pages), Installation And Service Note (36 pages), Installation And Service Note (37 pages), Manual (8 pages), Upgrade Manual (21 pages)

Print Page
Cisco UCS B200 M3 Installation And Service Note
d) Return the blade server to the chassis, power it on, and allow it to be automatically reacknowledged, reassociated,
and recommissioned.
e) Continue with enabling TPM support in the server BIOS in the next step.
Figure 21: TPM Socket Location
1
Step 2
Enable TPM Support in the BIOS.
a) Enable Quiet Mode in the BIOS policy of the server's service profile.
b) Establish a direct connection to the server, either by connecting a keyboard, monitor, and mouse to the front panel
using a KVM dongle (N20-BKVM) or by other means.
c) Reboot the server.
d) Press F2 during reboot to enter the BIOS setup screens.
e) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device Configuration
window.
f) Set the TPM Support option to Enabled.
g) Press F10 to save and exit. Allow the server to reboot, but watch for the prompt to press F2 in the next step.
Step 3
Enable TPM State in the BIOS.
a) Press F2 during reboot to enter the BIOS setup screens.
b) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device Configuration
window.
c) Set the TPM State option to Enabled.
d) Press F10 to save and exit. Allow the server to reboot, but watch for the prompt to press F2 in the next step.
Step 4
Verify that TPM Support and TPM State are enabled.
a) Press F2 during reboot to enter the BIOS setup screens.
b) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device Configuration
window.
c) Verify that TPM Support and TPM State are set to Enabled.
d) Continue with enabling the Intel TXT feature in the next step.
Step 5
Enable the Intel TXT feature in the BIOS.
a) Choose the Advanced tab.
b) Choose Intel TXT (LT-SX) Configuration to open the Intel TXT (LT-SX) Hardware Support window.
c) Set TXT Support to Enabled.
24
Front of server
2
TPM socket on motherboard