Cisco UCS C220 M3 Quick Start Manual - Page 10

Browse online or download pdf Quick Start Manual for Server Cisco UCS C220 M3. Cisco UCS C220 M3 12 pages. Security manager 4.3
Also for Cisco UCS C220 M3: Quick Start Manual (29 pages), Configuration Manual (33 pages), Upgrade Manual (10 pages)

Print Page

Recovery Media and Recovery Procedure

Note

Recovery Media and Recovery Procedure

Caution

Recovery media (2 DVDs) are provided with your new Bundle. Please take care that they are not

inadvertently discarded or lost.

There is no recovery partition.

Note

The purpose of the following procedure is to install Windows and Cisco Security Manager from the start;

Caution

installing Windows will delete all existing Windows files and data present in the Windows (C:\) partition

on the server. Files present in the Security Manager (D:\) partition will not be deleted. If required, back

up the files present on the server and ensure that you have the Security Manager database backup stored

on another server before proceeding.

If disk corruption or other hardware failure occurs, you can use the recovery media provided with your

new Bundle to restore the OS and Security Manager. Take the steps listed in the following procedure.

Procedure

From a laptop or other PC, log in to CIMC on the UCS server using Internet Explorer:

Step 1

https://<CIMC_IPAddress>/

Refer to the UCS documentation for setting up the CIMC IP address:

http://www.cisco.com/en/US/partner/products/ps10493/prod_installation_guides_list.html

Launch the KVM console from the CIMC web UI.

Step 2

Step 3

Insert the windows recovery media in the DVD drive of the laptop or other PC.

Step 4

Mount/Map the DVD drive as virtual media from the KVM console.

Step 5

Boot the UCS server into the EFI shell.

From the EFI shell execute following command to start Windows installation.

Step 6

fs1:\EFI\BOOT\BOOTX64.EFI

At the end of installation, enter the Windows administrator password.

Step 7

Download and install the UCS C220 M3 windows 2K8R2 x64 drivers for chipset and network devices.

Step 8

Refer to the UCS documentation for installing the Windows drivers:

http://www.cisco.com/en/US/partner/products/ps10493/products_user_guide_list.html

Step 9

Turn off the Windows firewall.

Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide

In this step, you must restart the computer. Restarting the Security Manager Daemon Manager

is not sufficient.

78-21007-01