Epson Perfection V200 Photo
Electrical
Note:
Check the label on the AC adapter or on the back of the scanner for
voltage information.
Scanner
Rated voltage
DC 13.5 V
Rated current
1.5 A
Power consumption
16.5 W operating
14 W stand-by mode
3.6 W sleep mode
0.5 W power off
AC Adapter (A391UC)
Rated input voltage
AC 100 to 120 V
Rated input current
0.6 A
Rated frequency
50 to 60 Hz
Rated output voltage DC 13.5 V
Rated output current 1.5 A
Environmental
Temperature Operating 50 to 95 °F (10 to 35 °C)
Storage
Humidity
Operating 10 to 80%, without condensation
Storage
Operating
conditions
USB Interface
Interface type
Universal Serial Bus Specification Revision
2.0
Interface standard Full Speed mode (12 Mbits per second)
and Hi-Speed mode (480 Mbits per
second) of Universal Serial Bus
Specification Revision 2.0.
Connector type
One Type B port
Standards and Approvals
Scanner
EMC
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22
2 - Epson Perfection V200 Photo
–13 to 140 °F (–25 to 60 °C)
10 to 85%, without condensation
Ordinary office or home
conditions. Avoid operating the
scanner in direct sunlight, near a
strong light source, or in extremely
dusty conditions.
AC Adapter
Safety
EMC
Using the Scanner Buttons
Before using the scanner buttons, make sure you have installed
Epson Scan and the other software that came with the scanner.
For details on using the buttons, see the on-screen User's Guide.
Button
Function
P Power/] Start
Turns the scanner on if pressed once while the
scanner is off.
Epson Scan starts if pressed once while the
scanner is on.
Turns the scanner off if held down for 3 seconds
while the scanner is on. (You cannot turn the
scanner off when the scanning software is
running.)
{ Copy
The Copy Utility starts.
| Scan to E-mail
Epson Scan automatically scans, then the Send File
Via E-mail window appears.
a Scan to PDF
The Scan to PDF window appears.
Placing Documents or Photos
Caution:
Do not place heavy objects on the document table glass and do not
press the glass with too much force.
1. Open the scanner cover.
Make sure the document mat is installed inside the cover. If
it is not installed, see page 6 for instructions.
7/07
UL60950-1
CAN/CSA-22.2 No. 60950-1-03
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
document
a
mat
Print Page