Epson Series Perfection 1240U Series Product Support Bulletin - Page 15

Browse online or download pdf Product Support Bulletin for Scanner Epson Series Perfection 1240U Series. Epson Series Perfection 1240U Series 24 pages. Product support bulletin(s)
Also for Epson Series Perfection 1240U Series: User Manual (7 pages), Startup Manual (48 pages), Product Information Manual (7 pages), Brochure (2 pages), Product Support Bulletin (23 pages), Manual (11 pages), Product Support Bulletin (40 pages), Product Support Bulletin (17 pages), Product Support Bulletin (3 pages), Product Support Bulletin (29 pages), Product Support Bulletin (8 pages), Product Support Bulletin (3 pages), Product Support Bulletin (11 pages), Product Support Bulletin (14 pages), Product Support Bulletin (18 pages), Product Support Bulletin (12 pages), Product Support Bulletin (40 pages), Product Support Bulletin (11 pages), Declaration Of Conformity (2 pages), Product Support Bulletin (40 pages), Product Support Bulletin (22 pages), Product Support Bulletin (12 pages), Product Support Bulletin (21 pages), Product Support Bulletin (12 pages)

Epson Series
Perfection 1240U Series Product Support Bulletin
This issue occurs in both Windows and Macintosh platforms.
Note:
When using Full Auto Mode, the images do scale up to 4" X 6".
Reason:
4" X 6" scaling in Manual Mode is not included in the specification for TWAIN 5.60A. The
automatic scale-up feature increases scanning time and therefore was removed. This feature
has also been removed from all TWAIN drivers released after 5.60A (i.e. 5.71A, 5.73A,
5.75A). This feature is also not available in the Perfection 3200 series scanner driver,
EPSON Scan 1.0.
Solution:
Use the Scale slider to increase the Scale percentage until your target size reaches 4" X 6".
This should be around 450%. You can also manually type in the size in the Target field boxes.
Switching to Full Auto Mode is another option. In this mode, the images are automatically
scaled up to approximately 4 X 6 inches at 300 dpi.
Note:
Full Auto mode does not support monochrome (Black and White) film or slides.
Page 2 of 2