Epson TM-H6000IIIE Development Manual - Page 7

Browse online or download pdf Development Manual for Scanner Epson TM-H6000IIIE. Epson TM-H6000IIIE 26 pages.
Also for Epson TM-H6000IIIE: Development Manual (45 pages), Development Manual (32 pages)

Print Page
Epson TM-H6000IIIE Development Manual
Do not change the current settings of DIP-SW2-5 to DIP-SW2-8.
Make other settings in accordance with the settings described above.
4) Ethernet Port
DIP-SW1
No.
Setting
1
2
3
4
5
6
7
8
It is possible to change the settings of DIP-SW1-1 and DIP-SW1-2, but it is
recommended to leave them OFF.
Set DIP-SW2-3 and DIP-SW2-4 to match the environment of use.
Do not change the current settings of DIP-SW2-5 to DIP-SW2-8.
Make other settings in accordance with the settings described above.

2.3 Port Information

1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
OFF
Recommended
OFF
Recommended
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
Item
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
DIP-SW2
No.
Setting
1
OFF
2
OFF
3
OFF
4
OFF
5
OFF
6
OFF
7
OFF
8
ON
Setting range
4800, 9600, 19200, 38400
8
NONE, ODD, EVEN
1
DTR/DSR
32 to 1024
0 to 9999
4
Version 3.00 Feb. 2019
Settable
Fixed at OFF
Settable
Settable
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at ON