aculab Prosody X Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Chassis aculab Prosody X. aculab Prosody X 13 pages. 1u high availability chassis
Also for aculab Prosody X: Installation Manual (20 pages)

Print Page

Getting started

This quick start guide is intended to get a Prosody X 1U High Availability Chassis installed

and in service ready for use. The guide does assume some basic knowledge of configuring

IP networks.

1.1

Installing the Software

The Prosody X 1U High Availability Chassis cannot be used as a standalone device but

must be configured and setup via external Linux or Windows PCs that are on the same

network. Once the HA Chassis is fully configured then its resources may be used by

multiple PCs on different networks provided the routing has been configured to allow this.

Although the configuration of the HA Chassis's elements can be done by different external

PCs we shall assume for this guide that it is all done via one PC that we shall call the

"host".

Step 1: Download the Aculab Installation Tool (AIT) to the host from

http://www.aculab.com/support/software-downloads

Step 2: Run the windows installer and install the AIT.

Step 3: Open the AIT by finding it in the start menu under Aculab\AIT

Step 4: From the AIT select the option to create a new package

Prosody X 1U High Availability Chassis guide

3 of 13