Motorola MaxTrac 300 Operating Instructions Manual - Page 12
Browse online or download pdf Operating Instructions Manual for Radio Motorola MaxTrac 300. Motorola MaxTrac 300 37 pages. 6-frequency conventional fm radio
Also for Motorola MaxTrac 300: Operating Instructions (2 pages), User Manual (10 pages)
Print Page
Receiving a Call Alert™
When a Call Alert is received, the monitor (Mon) LED will flash and a series of
four alert tones will sound. On a MaxTrac 300 radio, the display will also show
"CA" or calling ID). If it is a Call Alert voice message, a voice message will follow.
To return to the squelch operating mode, press the monitor button.
A Call Alert "leaves a message" for the mobile operator. The Mon LED will
continue to flash; the "CA" or calling ID will remain on the display; and the alert
tones will repeat every 10 seconds until the push-to-talk (PTT) or any other button
is pressed. The radio will then return to normal operation (on 900MHz models,
the radio returns to the external alarm armed mode, if enabled).
Mode
F1
Monitor
Mon
MaxTrac 100
Receiving an External Alarm (Horn or Lights)
The external alarm (horn or lights) feature requires an alarm relay cable. To
enable this feature, press the Select button on a MaxTrac 300 radio (H/L button
on 900MHz 6-channel radio) or turn the external switch on the alarm relay cable
to the ON position on a MaxTrac 100 radio. On a MaxTrac 300 radio, the display
will show "HL." To disable this feature, press the Select, Call, Exit, or H/L button.
When the external alarm feature is enabled, an incoming Call Alert will activate
the alarm. There will be a slight delay before the horn or lights turn on. During
this delay, the monitor (Mon) LED will flash and an alert tone will sound. An
operator, in or near the vehicle, who sees or hears the Call Alert indication will
have the opportunity to deactivate the alarm before it goes off. This is done by
pressing any button or taking the microphone off-hook.
Mode
F1
Monitor
Mon
MaxTrac 100
10
MaxTrac 100/300 Operation (cont.)
Signalling Operation (cont.)
F2
Bsy
F2
Bsy
Tx/Bsy Mon
Mon
Scan
MaxTrac 300 (16-/32-Channel)
Tx/Bsy Mon
Mon
Scan
MaxTrac 300 (16-/32-Channel)
Pri
Pri
Usr
Scan
Select
Pri
Pri
Usr
Scan
Select