Motorola ASTRO APX 1000 Series Quick Reference Manual - Page 3
Browse online or download pdf Quick Reference Manual for Portable Radio Motorola ASTRO APX 1000 Series. Motorola ASTRO APX 1000 Series 46 pages. Digital portable radios
Also for Motorola ASTRO APX 1000 Series: Quick Reference Card (2 pages), Quick Reference Card (2 pages)
Print Page
m
®
ASTRO
APX™ 1000 Series
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Radio Controls
Multi Function Knob
(MFK):
Primary Feature:
_________________
Secondary Feature:
Antenna
_________________
Accessory
Connector
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M
logo are trademarks or registered trademarks of Motorola Trademark
Holdings, LLC and are used under license. All other trademarks are
the property of their respective owners.
Top Lightbar
Indicator
Microphone
Top Side (Select)
Button
__________
PTT Button
Side Button 1
__________
Side Button 2
__________
Home Button
Keypad
Radio On/Off
Microphone
• On – Press and hold the MFK until the display
lights up.
• Off – Press and hold the MFK until you see
Power off?, then press Menu Select button
below Yes.
Battery
Select Zone and Channel
1
Press the MFK to see
2
Turn the MFK to scroll to desired zone or
channel.
Top (Orange)
3
Press MFK to select the desired zone or
Button
channel and exit Mode Change.
___________
Receiving and Transmitting
LED
1
Select zone/channel.
2
Listen for a transmission.
OR
Press and hold Volume Set button.
OR
Main
Press Monitor button and listen for activity.
Speaker
3
Adjust volume, if necessary.
Main Display
4
Press the PTT button to transmit; release to
receive.
Menu Select
Buttons
Sending an Emergency Alarm
Data Feature
1
Press and hold the Emergency button*.
Button
2
4-Way
The display shows Emergency and the
Navigation
current zone/channel. Radio sounds a short,
Button
medium-pitched tone, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
* Default emergency button press timer is set
to 1 second. This timer is programmable, see
Sending an Emergency Alarm in the user guide
for details.
on the screen.
To exit emergency at any time, press and hold
the Emergency button.
English